Left-Handed Warthog Grip
3D Print Your Own Left-Handed Warthog Stick Shell
Transform your Warthog stick into a left-handed version with this custom-designed shell. Follow these steps to create your own compatible shell, utilizing the internal components and buttons from the traditional Warthog stick.
Materials Needed:
3D printer
PLA or ABS filament
Threaded inserts (check the existing screws for size and thread pattern or completely replace all with 3mm screws and inserts)
Original screws from the Warthog stick
Digital design files for the left-handed shell (available for download)
Optional: sandpaper for smoothing
Step-by-Step Guide:
Download Design Files: Get the provided digital design files for the left-handed Warthog stick shell. Ensure they are compatible with your 3D printer specifications.
Prepare Your 3D Printer:
Load the filament into the 3D printer.
Set the printer settings according to the filament you’re using (temperature, layer height, and speed).
Print the Shell:
Start the printing process using the downloaded design file.
Monitor the print to ensure there are no errors or misprints.
Once printed, allow the shell to cool down before handling.
Finishing Touches:
Carefully remove the shell from the print bed.
Sand any rough edges if necessary for a smoother finish.
Insert Threaded Inserts:
Prepare areas designed for threaded inserts on the printed shell.
Install the threaded inserts using a heat gun or soldering iron for a secure fit.
Assemble Internal Components:
Carefully disassemble your original Warthog stick.
Extract the internal workings and buttons.
Place them into your newly printed shell, ensuring all components fit securely.
Screw Assembly:
Use the original screws to attach the top and bottom halves of the shell.
Double-check that everything is tightly secured.
Testing:
Before finalizing, test your newly converted left-handed Warthog stick to ensure all buttons and functionalities are operational.
By following these steps, you can enjoy the full functionality of your Warthog stick tailored for left-handed use. Happy flying!
3D Print Your Own Left-Handed Warthog Stick Shell
Transform your Warthog stick into a left-handed version with this custom-designed shell. Follow these steps to create your own compatible shell, utilizing the internal components and buttons from the traditional Warthog stick.
Materials Needed:
3D printer
PLA or ABS filament
Threaded inserts (check the existing screws for size and thread pattern or completely replace all with 3mm screws and inserts)
Original screws from the Warthog stick
Digital design files for the left-handed shell (available for download)
Optional: sandpaper for smoothing
Step-by-Step Guide:
Download Design Files: Get the provided digital design files for the left-handed Warthog stick shell. Ensure they are compatible with your 3D printer specifications.
Prepare Your 3D Printer:
Load the filament into the 3D printer.
Set the printer settings according to the filament you’re using (temperature, layer height, and speed).
Print the Shell:
Start the printing process using the downloaded design file.
Monitor the print to ensure there are no errors or misprints.
Once printed, allow the shell to cool down before handling.
Finishing Touches:
Carefully remove the shell from the print bed.
Sand any rough edges if necessary for a smoother finish.
Insert Threaded Inserts:
Prepare areas designed for threaded inserts on the printed shell.
Install the threaded inserts using a heat gun or soldering iron for a secure fit.
Assemble Internal Components:
Carefully disassemble your original Warthog stick.
Extract the internal workings and buttons.
Place them into your newly printed shell, ensuring all components fit securely.
Screw Assembly:
Use the original screws to attach the top and bottom halves of the shell.
Double-check that everything is tightly secured.
Testing:
Before finalizing, test your newly converted left-handed Warthog stick to ensure all buttons and functionalities are operational.
By following these steps, you can enjoy the full functionality of your Warthog stick tailored for left-handed use. Happy flying!
3D Print Your Own Left-Handed Warthog Stick Shell
Transform your Warthog stick into a left-handed version with this custom-designed shell. Follow these steps to create your own compatible shell, utilizing the internal components and buttons from the traditional Warthog stick.
Materials Needed:
3D printer
PLA or ABS filament
Threaded inserts (check the existing screws for size and thread pattern or completely replace all with 3mm screws and inserts)
Original screws from the Warthog stick
Digital design files for the left-handed shell (available for download)
Optional: sandpaper for smoothing
Step-by-Step Guide:
Download Design Files: Get the provided digital design files for the left-handed Warthog stick shell. Ensure they are compatible with your 3D printer specifications.
Prepare Your 3D Printer:
Load the filament into the 3D printer.
Set the printer settings according to the filament you’re using (temperature, layer height, and speed).
Print the Shell:
Start the printing process using the downloaded design file.
Monitor the print to ensure there are no errors or misprints.
Once printed, allow the shell to cool down before handling.
Finishing Touches:
Carefully remove the shell from the print bed.
Sand any rough edges if necessary for a smoother finish.
Insert Threaded Inserts:
Prepare areas designed for threaded inserts on the printed shell.
Install the threaded inserts using a heat gun or soldering iron for a secure fit.
Assemble Internal Components:
Carefully disassemble your original Warthog stick.
Extract the internal workings and buttons.
Place them into your newly printed shell, ensuring all components fit securely.
Screw Assembly:
Use the original screws to attach the top and bottom halves of the shell.
Double-check that everything is tightly secured.
Testing:
Before finalizing, test your newly converted left-handed Warthog stick to ensure all buttons and functionalities are operational.
By following these steps, you can enjoy the full functionality of your Warthog stick tailored for left-handed use. Happy flying!